在过往的后台开发中,我们往往使用java自带的线程或线程池,来进行异步的调用。这对于效果来说没什么,甚至可以让开发人员对底层的状况更清晰,但是对于代码的易读性和可维护性却非常的差。
开发人员在实际使用过程中,应该更多的将精力放置在业务代码的书写过程中,而不是系统代码的维护中。你需要懂,但是不需要你直接维护去写,这才是编程语言的风向标。(这也是为什么spring在目前的java开发中,占用比重如此之大的原因之一)(防盗连接:本文首发自http://www.cnblogs.com/jilodream/ )
下面来看使用Springboot 来实现异步调用的集中场景
一、简易注解,无需额外配置
1、添加@EnableAsync 到启动类(或者线程池配置类中)
2、添加@Async到需要异步执行的方法中
代码如下:

启动类

1 @EnableAsync
2 @SpringBootApplication 3 public class DemoLearnSpringbootApplication { 4 5 public static void main(String[] args) { 6 SpringApplication.run(DemoLearnSpringbootApplication.class, args); 7  } 8 }

调用类

 1 @Component
 2 public class SimpleAsyncDemo {
 3     @Autowired
 4     private SimpleTaskHandler simpleTaskHandler;
 5 
 6 
 7     @PostConstruct
 8     public void execTaskHandler1() {
 9         try {
10             simpleTaskHandler.handle1(2);
11             simpleTaskHandler.handle2(2);
12             simpleTaskHandler.handle3(2);
13             simpleTaskHandler.handle1(2);
14             simpleTaskHandler.handle2(2);
15             simpleTaskHandler.handle3(2);
16             simpleTaskHandler.handle1(2);
17             simpleTaskHandler.handle2(2);
18             simpleTaskHandler.handle3(2);
19         } catch (InterruptedException e) {
20             e.printStackTrace();
21         }
22     }
23   
24 }

被异步调用的类

 1 @Component
 2 public class SimpleTaskHandler {
 3 
 4     public void printCurrentTime(String key) {
 5         SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
 6         System.out.println(format.format(new Date()) + "***" + key + "****" + Thread.currentThread().getName());
 7     }
 8 
 9     @Async
10     public void handle1(int time) throws InterruptedException {
11         TimeUnit.SECONDS.sleep(time);
12         printCurrentTime("handle1");
13     }
14 
15     @Async
16     public void handle2(int time) throws InterruptedException {
17         TimeUnit.SECONDS.sleep(time);
18         printCurrentTime("handle2");
19     }
20 
21     @Async
22     public void handle3(int time) throws InterruptedException {
23         TimeUnit.SECONDS.sleep(time);
24         printCurrentTime("handle3");
25     }
26 
27 
28 }

 执行结果

handle1、handle2、handle3的执行结果为乱序,不可预估。这样最简易的通过2个注解即完成异步线程的调用了。
细心的同学已经发现了,连续调用9次异步线程后,最后一次的线程名称就会与之前的重复。这是由于默认的线程池配置的结果。
默认配置如下

 

# 核心线程数
spring.task.execution.pool.core-size=8  
# 最大线程数
spring.task.execution.pool.max-size=16
# 空闲线程存活时间
spring.task.execution.pool.keep-alive=60s
# 是否允许核心线程超时
spring.task.execution.pool.allow-core-thread-timeout=true
# 线程队列数量
spring.task.execution.pool.queue-capacity=100
# 线程关闭等待
spring.task.execution.shutdown.await-termination=false
spring.task.execution.shutdown.await-termination-period=
# 线程名称前缀
spring.task.execution.thread-name-prefix=task-

二、自定义线程池
只通过注解来完成异步线程调用,简单明了,对应的异步线程来自springboot 默认生成的异步线程池。但是有些场景却并不满足。所以我们需要针对业务需要定义自己的线程池配置文件(防盗连接:本文首发自http://www.cnblogs.com/jilodream/ )
1、在application.properties中定义我们自己的线程池配置
2、在springboot项目中,添加对应的线程池bean对象
3、添加@EnableAsync 到启动类(或者线程池配置类中)
4、添加@Async到需要异步执行的方法中
代码如下:

application.properties配置文件

task.pool.demo.corePoolSize= 5
task.pool.demo.maxPoolSize= 10 task.pool.demo.keepAliveSeconds= 300 task.pool.demo.queueCapacity= 50

 调用类

 1 @Component
 2 public class SimpleAsyncDemo {
 3 
 4     @Autowired
 5     private PoolTaskHandler poolTaskHandler;
 6 
 7 
 8     @PostConstruct
 9     public void execTaskHandler2() {
10         try {
11             poolTaskHandler.handle1(2);
12             poolTaskHandler.handle2(2);
13             poolTaskHandler.handle3(2);
14             poolTaskHandler.handle1(2);
15             poolTaskHandler.handle2(2);
16             poolTaskHandler.handle3(2);
17             poolTaskHandler.handle1(2);
18             poolTaskHandler.handle2(2);
19             poolTaskHandler.handle3(2);
20         } catch (InterruptedException e) {
21             e.printStackTrace();
22         }
23     }
24 
25 }

 异步线程池的配置类

 1 @Configuration
 2 public class ThreadPoolConfig {
 3 
 4     @Value("${task.pool.demo.corePoolSize}")
 5     private int corePoolSize;
 6     @Value("${task.pool.demo.maxPoolSize}")
 7     private int maxPoolSize;
 8     @Value("${task.pool.demo.queueCapacity}")
 9     private int queueCapacity;
10     @Value("${task.pool.demo.keepAliveSeconds}")
11     private int keepAliveSeconds;
12 
13 
14     @Bean("handleAsync")
15     public TaskExecutor taskExecutor() {
16         ThreadPoolTaskExecutor executor = new ThreadPoolTaskExecutor();
17         // 设置核心线程数
18         executor.setCorePoolSize(corePoolSize);
19         // 设置最大线程数
20         executor.setMaxPoolSize(maxPoolSize);
21         // 设置队列容量
22         executor.setQueueCapacity(queueCapacity);
23         // 设置线程活跃时间(秒)
24         executor.setKeepAliveSeconds(keepAliveSeconds);
25         // 设置默认线程名称前缀
26         executor.setThreadNamePrefix("Thread-ABC-");
27         // 设置拒绝策略
28         executor.setRejectedExecutionHandler(new ThreadPoolExecutor.CallerRunsPolicy());
29         // 等待所有任务结束后再关闭线程池
30         executor.setWaitForTasksToCompleteOnShutdown(true);
31         return executor;
32     }
33 }

 被异步调用的类

 1 @Component
 2 public class PoolTaskHandler {
 3 
 4     public void printCurrentTime(String key) {
 5         SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
 6         System.out.println(format.format(new Date()) + "***" + key + "****" + Thread.currentThread().getName());
 7     }
 8 
 9     @Async("handleAsync")
10     public void handle1(int time) throws InterruptedException {
11         TimeUnit.SECONDS.sleep(time);
12         printCurrentTime("handle-1");
13     }
14 
15     @Async("handleAsync")
16     public void handle2(int time) throws InterruptedException {
17         TimeUnit.SECONDS.sleep(time);
18         printCurrentTime("handle-2");
19     }
20 
21     @Async("handleAsync")
22     public void handle3(int time) throws InterruptedException {
23         TimeUnit.SECONDS.sleep(time);
24         printCurrentTime("handle-3");
25     }
26 
27 
28 }

执行结果如下

与上例类似,我们发现请求线程变成了每5个一批,这与我们在配置文件中的配置互相印证。
调用类

 1 @Component
 2 public class SimpleAsyncDemo {
 3 
 4     @Autowired
 5     private ReturnTaskHandler returnTaskHandler;
 6 
 7     @PostConstruct
 8     public void execTaskHandler3() {
 9         try {
10             String a1 = returnTaskHandler.handle1(2);
11             String a2 = returnTaskHandler.handle2(2);
12             String a3 = returnTaskHandler.handle3(2);
13             String a4 = returnTaskHandler.handle1(2);
14             String a5 = returnTaskHandler.handle2(2);
15             String a6 = returnTaskHandler.handle3(2);
16             String a7 = returnTaskHandler.handle1(2);
17             String a8 = returnTaskHandler.handle2(2);
18             String a9 = returnTaskHandler.handle3(2);
19             int c = 1;
20         } catch (InterruptedException e) {
21             e.printStackTrace();
22         }
23     }
24 
25 }

被调用类

 1 @Component
 2 public class ReturnTaskHandler {
 3 
 4     public void printCurrentTime(String key) {
 5         SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
 6         System.out.println(format.format(new Date()) + "***" + key + "****" + Thread.currentThread().getName());
 7     }
 8 
 9     @Async("handleAsync")
10     public String handle1(int time) throws InterruptedException {
11         TimeUnit.SECONDS.sleep(time);
12         printCurrentTime("handle-1");
13         return "result1";
14     }
15 
16     @Async("handleAsync")
17     public String handle2(int time) throws InterruptedException {
18         TimeUnit.SECONDS.sleep(time);
19         printCurrentTime("handle-2");
20         return "result2";
21     }
22 
23     @Async("handleAsync")
24     public String handle3(int time) throws InterruptedException {
25         TimeUnit.SECONDS.sleep(time);
26         printCurrentTime("handle-3");
27         return "result3";
28     }
29 
30 }

其余代码继续我们使用上文中的其他代码
结果如下

所有结果返回都是null值。
如果想要拿到正确的执行结果,我们需要使用future接口类看来帮忙接住异步线程的返回结果(关于future等接口类的内容我会在后边的文章中讲解)
其余代码继续我们使用上文中的其他代码,改动的代码如下:(防盗连接:本文首发自http://www.cnblogs.com/jilodream/ )
被调用类

 1 @Component
 2 public class ReturnSuccTaskHandler {
 3 
 4     public void printCurrentTime(String key) {
 5         SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
 6         System.out.println(format.format(new Date()) + "***" + key + "****" + Thread.currentThread().getName());
 7     }
 8 
 9     @Async("handleAsync")
10     public Future<String> handle1(int time) throws InterruptedException {
11         TimeUnit.SECONDS.sleep(time);
12         printCurrentTime("handle-1");
13         return new AsyncResult<>("result1");
14     }
15 
16     @Async("handleAsync")
17     public Future<String> handle2(int time) throws InterruptedException {
18         TimeUnit.SECONDS.sleep(time);
19         printCurrentTime("handle-2");
20         return new AsyncResult<>("result2");
21     }
22 
23     @Async("handleAsync")
24     public Future<String> handle3(int time) throws InterruptedException {
25         TimeUnit.SECONDS.sleep(time);
26         printCurrentTime("handle-3");
27         return new AsyncResult<>("result3");
28     }
29 
30 
31 }

调用类

 1 @Component
 2 public class SimpleAsyncDemo {
 3 
 4 
 5     @Autowired
 6     private ReturnSuccTaskHandler returnSuccTaskHandler;
 7 
 8 
 9 
10     @PostConstruct
11     public void execTaskHandler4() {
12         try {
13             Future<String> a1 = returnSuccTaskHandler.handle1(2);
14             Future<String> a2 = returnSuccTaskHandler.handle2(2);
15             Future<String> a3 = returnSuccTaskHandler.handle3(2);
16             Future<String> a4 = returnSuccTaskHandler.handle1(2);
17             Future<String> a5 = returnSuccTaskHandler.handle2(2);
18             Future<String> a6 = returnSuccTaskHandler.handle3(2);
19             Future<String> a7 = returnSuccTaskHandler.handle1(2);
20             Future<String> a8 = returnSuccTaskHandler.handle2(2);
21             Future<String> a9 = returnSuccTaskHandler.handle3(2);
22             while (true){
23                 // 如果任务都做完就执行如下逻辑
24                 if (a1.isDone() &&
25                         a2.isDone()&&
26                         a3.isDone()&&
27                         a4.isDone()&&
28                         a5.isDone()&&
29                         a6.isDone()&&
30                         a7.isDone()&&
31                         a8.isDone()&&
32                         a9.isDone()){
33                     SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
34                     System.out.println(format.format(new Date()) + "async task end.");
35                     System.out.println("async result:"+a1.get());
36                     System.out.println("async result:"+a2.get());
37                     System.out.println("async result:"+a3.get());
38                     System.out.println("async result:"+a3.get());
39                     System.out.println("async result:"+a4.get());
40                     System.out.println("async result:"+a5.get());
41                     System.out.println("async result:"+a6.get());
42                     System.out.println("async result:"+a7.get());
43                     System.out.println("async result:"+a8.get());
44                     System.out.println("async result:"+a9.get());
45                     break;
46                 }
47             }
48         } catch (InterruptedException | ExecutionException e) {
49             e.printStackTrace();
50         }
51     }
52 
53 
54 }

 输出结果如下,我们可以发现 ,1、可以拿到返回结果,2、在最后一个子任务执行完成后,即立刻拿到结果。